منتدى خبراء المحمول
هل تريد التفاعل مع هذه المساهمة؟ كل ما عليك هو إنشاء حساب جديد ببضع خطوات أو تسجيل الدخول للمتابعة.

منتدى خبراء المحمولدخول


descriptionارجو المساعده  Emptyارجو المساعده

more_horiz
عندي جوال نوكيا n8 كان يشغل معي زي الفل بس مش عارف كم رمز الحمايه الهاتف كان مفتوح بس كنت اشتي اسوي له رمز بس مش عارف الرمز الاول سوت له فرمات بس ماالتغاء الرمز.
المـــهم :: قلي واحد صاحبي سوئله تفليش عشان يبتعد الرمز
قمت ب انزل فلاشه 111.040.1511 واتبعت الخطوات
ومن ثم نزلت برنامج BEST infinity واتبعت الخطوات
ثم نقلت ملفات الفلاشه للبرنامج وقمت ب التفليش فطلعت لي شاشه سوداء مكتوب فيها nokia test فخفت وضغط حاجه اسمها
اريس فلاش حاجه زي كذا
وبعدين الجوال مش راضي يشتغل
المهم الان : لما افلاش الجوال بفلاشه قديمه يشتغل معي بس يقول لي (حدث خطاء تم حذف عنصر الواجهه) ويسوي كل 10 دقائق اعاده تشغيل ولا شي يشتغل لاشريحه ولا الاتصال
ولما اجي افلاشه ب اخر اصدار يشغل وتطلع كلمه نوكيا بي يقف عن النقاط الخمسه

ملاحظه : عندما اقوم بتفليش الجهاز بتخه قديمه يشتغل بس يعلق كثييييررر

مع العلم ان الرقم المتسلسل فد تغير

قد جربت اكثر من 20 فلاشه نفس الحال ارجو المساعده

descriptionارجو المساعده  Emptyرد: ارجو المساعده

more_horiz
مرحب اخ عتيق جرب فلش الجهاز بأخر اصدار ومعاك للمتابعه

descriptionارجو المساعده  Emptyرد: ارجو المساعده

more_horiz
هلا بيك اخي العزيز
جربت اسوي فلاشه اخر اصدار نزلته من موقع firwere
يشتغل الجهاز وبعدين تطلع نوكيا وتطله النقاط الخمس
ملاخظه : علي ما اظن ان الخلل من الرقم التسلسلي

descriptionارجو المساعده  Emptyرد: ارجو المساعده

more_horiz
هلا اخي الكريم هل الهاتف يتم تفليشه حتي النهايه بما في ذلك قراءة الفيرشن معاك للمتابعه

descriptionارجو المساعده  Emptyرد: ارجو المساعده

more_horiz
نعم بيتفلش للنهايه

descriptionارجو المساعده  Emptyرد: ارجو المساعده

more_horiz
ابشرك يا اخي العزيز
وجدت ملف في الكمبيوتر الذي تم التفليش منه
اسم الملف infinty box فتحته حصلت ملف اسمه Backup فتحه وجدت ملف اسمه  357919046821625 وهذه رقم imei الاصلي حق الجوال حقي بصيغه rpl

هل هاذا ب يفيدنا
وكيف اسوي

descriptionارجو المساعده  Emptyرد: ارجو المساعده

more_horiz
وبنسبه لملفات PM مش موجود
وايش عملها هذا الملفات

descriptionارجو المساعده  Emptyرد: ارجو المساعده

more_horiz
هذا القراءه حق البرنامج يا اخي




card found: A1B5CCE8
registered to: CycloneBox

Connect phone on selected interface...

Connect phone on selected interface...

Checking, wait ...
Get phone info data from flash...
- > IMEI damaged
Continue search by user request
Get secure data...
ID_INFO : Not Found (Minor)
 - > Initial check failed, SimLock seems FULLY dead :(

Elapsed: 00:00:36

Checking, wait ...
Get phone info data from flash...
- > IMEI damaged
Continue search by user request
Get secure data...
ID_INFO : Not Found (Minor)
 - > Initial check failed, SimLock seems FULLY dead :(

Elapsed: 00:00:28

Read Uniq key data started...

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
PUBLIC ID:     1C30020978DA034438E1B360B43FA82619F45AE7
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
Fetching data, wait...

 - > Reinsert cable and battery, press powerOn button again
 - > For X7, E7 - just waiting, near 1 minute
 - > When BEST start Search Phone - Press PowerOn if needed

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     1C30020978DA034438E1B360B43FA82619F45AE7
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D172C32473AE199B213465ABB3853246F9631231
ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Wait, reconneting...

rap= 1C30020978DA034438E1B360B43FA82619F45AE7
hash= 916F75217F32081248B15C38DFC8E81B
key= 965FAFBB9E50B07B58F69CE47C64A71163599799

Key file updated...

Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia N8-00
Software ver : V 79_sr1_12w18.5 27-07-12 RM-596 (c) Nokia
IMEI    :      357919046821625
Ape Ver :      111.040.1511
APE Var :      111.040.1511111.040.1511.13.01111.040.1511.C04.01
APE ADSP:      256
DSP Ver :      92_12w18
APE Test:      0.162
PPM     :     
CNT     :     
Product SN   :     MSE952287
Product code :     059D5C3
Base Prd.code:     0596826
Long Prod.SN :     0
Hardware info=======
HWID  : 7470
Retu  : 35
Tahvo : 00
Batery: 3898 mV
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
Lock info ===========
IMEI       : 357919046821625
IMEI spNet : 3A 75 19 09 64 28 61 02
IMEI svNet : 33 75 19 09 64 28 61 42 F5

Conf key     : 0000000000000000
Provider key : 2440700000000000
Country      : Finland
Operator     : NOKIA (Open)
Counters     : Key 0  [3] , Fbus 0  [10]
Blocks       : 7

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS :  All Open
=============================
CRT308 Backup Created

SDD key status : Ok
CMLA Key status : Not Present
SimLock status : Ok
Security status : Damaged!!!!!
PA_SL3 phone ,  SP_CODE_LEN : 15

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method

Done!

Will Write RPL keys now...
Check RPL file...
CCC Data found! (CMT)
HWC Data found! (CMT)
-> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus

Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

User ACCEPTED FULL ERASE
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     1C30020978DA034438E1B360B43FA82619F45AE7
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02

- > Backup check skipped by user

Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D172C32473AE199B213465ABB3853246F9631231

Reading NPC certificate...
IMEI : 357919046821625
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Infinity Best\Backup\Cert\357919046821625_CRT_2nd.rpl


ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x1FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:01

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings :
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-596_111.040.1511_79u_prd.core.fpsx
PPM : RM-596_111.040.1511_13.01_MEA_A_79u_prd.rofs2.fpsx
PPM2 : RM-596_111.040.1511_C04.01_MEA_1_79u_prd.rofs3.fpsx
CNT : RM596_APE_ONLY_ENO_11w36_v0.162.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     1C30020978DA034438E1B360B43FA82619F45AE7
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
 - > No any CRT data (MCU damaged/CERT erased), skip saving

   ===Flashing [MCU]===
Erase : Processing RM-596_111.040.1511_79u_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing RM-596_111.040.1511_79u_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [SOS+DECOMP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS+IVE3A]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 526 blocks
TIME : Write time : 00:00:16
MCU Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [PPM]===
Erase : Processing RM-596_111.040.1511_13.01_MEA_A_79u_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-596_111.040.1511_13.01_MEA_A_79u_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 203 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [PPM2]===
Erase : Processing RM-596_111.040.1511_C04.01_MEA_1_79u_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-596_111.040.1511_C04.01_MEA_1_79u_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
CMT: Writing Hash CERT [SOS+IVE3B]
Total writen 4 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [CNT]===
Erase : Processing RM596_APE_ONLY_ENO_11w36_v0.162.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM596_APE_ONLY_ENO_11w36_v0.162.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 19 blocks
TIME : Write time : 00:00:00
CNT Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:26
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia N8-00
Software Info:     V 79_sr1_12w18.5 27-07-12 RM-596 (c) Nokia
IMEI:  12345610654321?
Ape Version: 111.040.1511
Product code: 
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Battery voltage is enough for start
AfterFlash operations done ;D
Done!

Elapsed: 00:00:41
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia N8-00
Software ver : V 79_sr1_12w18.5 27-07-12 RM-596 (c) Nokia
IMEI    :      12345610654321?
Ape Ver :      111.040.1511
APE Var :      111.040.1511111.040.1511.13.01111.040.1511.C04.01
APE ADSP:      256
DSP Ver :      92_12w18
APE Test:      0.162
PPM     :     
CNT     :     
Product SN   :     0
Product code :    
Long Prod.SN :     0
Hardware info=======
HWID  :
Retu  : 35
Tahvo : 00
Batery: 3898 mV
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
Lock info ===========
IMEI       : 12345610654321?
IMEI spNet : 1A 32 54 16 60 45 23 01
IMEI svNet : 13 32 54 16 60 45 23 41 F5

Unable to read Lock table... :(

IMEI DAMAGED!!! CRT308 save skipped... :(

SDD key status : Damaged!!!!!
CMLA Key status : Not Present
SimLock status : Ok
Security status : Ok
PA_SL phone

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method

Done!

Reading Phone Info....
Connected phone -    Nokia N8-00
Software ver : V 79_sr1_12w18.5 27-07-12 RM-596 (c) Nokia
IMEI    :      12345610654321?
Ape Ver :      111.040.1511
APE Var :      111.040.1511111.040.1511.13.01111.040.1511.C04.01
APE ADSP:      256
DSP Ver :      92_12w18
APE Test:      0.162
PPM     :     
CNT     :     
Product SN   :     0
Product code :    
Long Prod.SN :     0
Hardware info=======
HWID  :
Retu  : 35
Tahvo : 00
Batery: 3898 mV
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
Lock info ===========
IMEI       : 12345610654321?
IMEI spNet : 1A 32 54 16 60 45 23 01
IMEI svNet : 13 32 54 16 60 45 23 41 F5

Unable to read Lock table... :(

IMEI DAMAGED!!! CRT308 save skipped... :(

SDD key status : Damaged!!!!!
CMLA Key status : Not Present
SimLock status : Ok
Security status : Ok
PA_SL phone

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method

Done!

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
-> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus

Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Backup Certificates now...
Backup CRT308 data...
CRT308 Backup Created
Check communication with phone....
Reboot....
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     1C30020978DA034438E1B360B43FA82619F45AE7
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D172C32473AE199B213465ABB3853246F9631231
ADL: Reading certificates...

Reading NPC certificate...
IMEI : 000000000000000
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

ADL: Reading certificates done! :)
ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

All done, Disconnecting

Elapsed: 00:00:07
Connect phone on selected interface...


Phone found!
Series 60 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia N8-00
Software ver : V 79_sr1_12w18.5 27-07-12 RM-596 (c) Nokia
IMEI    :      12345610654321?
Ape Ver :      111.040.1511
APE Var :      111.040.1511111.040.1511.13.01111.040.1511.C04.01
APE ADSP:      256
DSP Ver :      92_12w18
APE Test:      0.162
PPM     :     
CNT     :     
Product SN   :     0
Product code :    
Long Prod.SN :     0
Hardware info=======
HWID  :
Retu  : 35
Tahvo : 00
Batery: 3896 mV
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
Lock info ===========
IMEI       : 12345610654321?
IMEI spNet : 1A 32 54 16 60 45 23 01
IMEI svNet : 13 32 54 16 60 45 23 41 F5

Unable to read Lock table... :(

IMEI DAMAGED!!! CRT308 save skipped... :(

SDD key status : Damaged!!!!!
CMLA Key status : Not Present
SimLock status : Ok
Security status : Ok
PA_SL phone

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method

Done!

Warranty IMEI restore

Warranty IMEI restore

Warranty IMEI restore

Writing product data...
Setting Warranty IMEI to 12345610654321? Ok
Write done

Writing product data...
Setting Warranty IMEI to 12345610654321? Ok
Write done

Will write LifeTime data...
Set value: 000 h, 00 m
Creating data block...
Result : Error
Done


descriptionارجو المساعده  Emptyرد: ارجو المساعده

more_horiz
وهذا قراءه اخري


card found: A1B5CCE8
registered to: CycloneBox

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings :
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-596_111.040.1511_79u_prd.core.fpsx
PPM : RM-596_111.040.1511_13.01_MEA_A_79u_prd.rofs2.fpsx
PPM2 : RM-596_111.040.1511_C04.01_MEA_1_79u_prd.rofs3.fpsx
CNT : RM596_APE_ONLY_ENO_11w36_v0.162.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     1C30020978DA034438E1B360B43FA82619F45AE7
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D172C32473AE199B213465ABB3853246F9631231
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 357919046821625
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Infinity Best\Backup\Cert\357919046821625_CRT_2nd.rpl

   ===Flashing [MCU]===
Erase : Processing RM-596_111.040.1511_79u_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing RM-596_111.040.1511_79u_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [SOS+DECOMP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS+IVE3A]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 526 blocks
TIME : Write time : 00:00:18
MCU Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [PPM]===
Erase : Processing RM-596_111.040.1511_13.01_MEA_A_79u_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-596_111.040.1511_13.01_MEA_A_79u_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 203 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [PPM2]===
Erase : Processing RM-596_111.040.1511_C04.01_MEA_1_79u_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-596_111.040.1511_C04.01_MEA_1_79u_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
CMT: Writing Hash CERT [SOS+IVE3B]
Total writen 4 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [CNT]===
Erase : Processing RM596_APE_ONLY_ENO_11w36_v0.162.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM596_APE_ONLY_ENO_11w36_v0.162.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 19 blocks
TIME : Write time : 00:00:00
CNT Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:28
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia N8-00
Software Info:     V 79_sr1_12w18.5 27-07-12 RM-596 (c) Nokia
IMEI:  357919046821625
Ape Version: 111.040.1511
Product code:  059D5C3
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Battery voltage is enough for start
AfterFlash operations done ;D
Done!

Elapsed: 00:00:59
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : Manual
->  File : RM-596_111.040.1511_79u_prd.core.fpsx not found! Check it!
->  File : RM-596_111.040.1511_02.01_Euro_2_79u_prd.rofs2.fpsx not found! Check it!
->  File : EAF30897_RM-596_111.040.1511_253.01_default_79u.2012.20_prd.rofs3.fpsx not found! Check it!
->  File : RM-596_111.040.1511_U01.01_79u.uda.fpsx not found! Check it!
->  File : RM596_APE_ONLY_ENO_11w36_v0.162.fpsx not found! Check it!
Check FlashFiles, Please, wait...

->  Flash Files are NOT selected!
      You can Select:
      S40     : Any, but MCU need present in filelist
      S60     : Any, but CORE/MCU need present in filelist
      S60 APE : MCU+PPM, MCU+PPM+CNT

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-596_111.040.1511_79u_prd.core.fpsx
PPM : RM-596_111.040.1511_13.01_MEA_A_79u_prd.rofs2.fpsx
PPM2 : RM-596_111.040.1511_C04.01_MEA_1_79u_prd.rofs3.fpsx
CNT : RM-596_111.040.1511_U07.01_79u.uda.fpsx
APE : RM596_APE_ONLY_ENO_11w36_v0.162.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     1C30020978DA034438E1B360B43FA82619F45AE7
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D172C32473AE199B213465ABB3853246F9631231
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 357919046821625
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Infinity Best\Backup\Cert\357919046821625_CRT_2nd.rpl

   ===Flashing [MCU]===
Erase : Processing RM-596_111.040.1511_79u_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing RM-596_111.040.1511_79u_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [SOS+DECOMP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS+IVE3A]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Write CMT block error : 82106D00
Write CMT failed on block 444 :(

Connect phone on selected interface...


Elapsed: 00:00:29
Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-596_111.040.1511_79u_prd.core.fpsx
PPM : RM-596_111.040.1511_13.01_MEA_A_79u_prd.rofs2.fpsx
PPM2 : RM-596_111.040.1511_C04.01_MEA_1_79u_prd.rofs3.fpsx
CNT : RM-596_111.040.1511_U07.01_79u.uda.fpsx
APE : RM596_APE_ONLY_ENO_11w36_v0.162.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : Verify Error :(
Try again...
->  Error answer from BootRom
->  Boot fail...
    Flashing failed...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-596_111.040.1511_79u_prd.core.fpsx
PPM : RM-596_111.040.1511_13.01_MEA_A_79u_prd.rofs2.fpsx
PPM2 : RM-596_111.040.1511_C04.01_MEA_1_79u_prd.rofs3.fpsx
CNT : RM-596_111.040.1511_U07.01_79u.uda.fpsx
APE : RM596_APE_ONLY_ENO_11w36_v0.162.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     1C30020978DA034438E1B360B43FA82619F45AE7
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D172C32473AE199B213465ABB3853246F9631231
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 357919046821625
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Infinity Best\Backup\Cert\357919046821625_CRT_2nd.rpl

   ===Flashing [MCU]===
Erase : Processing RM-596_111.040.1511_79u_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing RM-596_111.040.1511_79u_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [SOS+DECOMP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS+IVE3A]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 526 blocks
TIME : Write time : 00:00:16
MCU Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [PPM]===
Erase : Processing RM-596_111.040.1511_13.01_MEA_A_79u_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-596_111.040.1511_13.01_MEA_A_79u_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 203 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [PPM2]===
Erase : Processing RM-596_111.040.1511_C04.01_MEA_1_79u_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-596_111.040.1511_C04.01_MEA_1_79u_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
CMT: Writing Hash CERT [SOS+IVE3B]
Total writen 4 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [CNT]===
Erase : Processing RM-596_111.040.1511_U07.01_79u.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing RM-596_111.040.1511_U07.01_79u.uda.fpsx
Total writen 477 blocks
TIME : Write time : 00:00:17
CNT Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [APE]===
Erase : Processing RM596_APE_ONLY_ENO_11w36_v0.162.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM596_APE_ONLY_ENO_11w36_v0.162.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 19 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:44
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia N8-00
Software Info:     V 79_sr1_12w18.5 27-07-12 RM-596 (c) Nokia
IMEI:  357919046821625
Ape Version: 111.040.1511
Product code:  059D5C3
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Battery voltage is enough for start
AfterFlash operations done ;D
Done!

Elapsed: 00:01:04
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
No any part for write! check file, Write Settings

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
No any part for write! check file, Write Settings

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
No any part for write! check file, Write Settings

Read Uniq key data started...

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
PUBLIC ID:     1C30020978DA034438E1B360B43FA82619F45AE7
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
Fetching data, wait...

 - > Reinsert cable and battery, press powerOn button again
 - > For X7, E7 - just waiting, near 1 minute
 - > When BEST start Search Phone - Press PowerOn if needed

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     1C30020978DA034438E1B360B43FA82619F45AE7
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D172C32473AE199B213465ABB3853246F9631231
ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Wait, reconneting...

rap= 1C30020978DA034438E1B360B43FA82619F45AE7
hash= 916F75217F32081248B15C38DFC8E81B
key= 965FAFBB9E50B07B58F69CE47C64A71163599799

Key file updated...

Done!

Connect phone on selected interface...

Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---

-------BOOT BREAKED BY USER-------

->  Phone not found.. :(
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm, RAPIDO

Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     1C30020978DA034438E1B360B43FA82619F45AE7
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D172C32473AE199B213465ABB3853246F9631231
ADL: Reading certificates...

Reading NPC certificate...
IMEI : 357919046821625
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

ADL: Reading certificates done! :)
ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Wait, reconneting...

SLx Simlock Data read ... ok
SL3 Simlock Sign read ... ok
CRT308 Backup Created
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...

RPL saved : C:\InfinityBox\BEST\Infinity Best\Backup\Cert\357919046821625_2nd.rpl

All done, Disconnecting

Elapsed: 00:00:39
Connect phone on selected interface...


Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     1C30020978DA034438E1B360B43FA82619F45AE7
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D172C32473AE199B213465ABB3853246F9631231
ADL: Preparing for erase certificates...


ADL: Erase Flash certs done! :)

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot
Done!

Phone disconected!

Connect phone on selected interface...

Connect phone and try again...

Connect phone on selected interface...

Phone not connected...

Aborted by user...


Link to my account: http://user.infinity-best.com:82/
Login: 00A1B5CCE8
Password: A1B5CCE8

Connecting to server...

?

Error in job...

Phone found!
Series 60 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia N8-00
Software ver : V 79_sr1_12w18.5 27-07-12 RM-596 (c) Nokia
IMEI    :      357919046821625
Ape Ver :      111.040.1511
APE Var :      111.040.1511111.040.1511.13.01111.040.1511.C04.01
APE ADSP:      256
DSP Ver :      92_12w18
APE Test:      0.162
PPM     :     
CNT     :     
Product SN   :     MSE952287
Product code :     059D5C3
Base Prd.code:     0596826
Long Prod.SN :     0
Hardware info=======
HWID  : 7470
Retu  : 35
Tahvo : 00
Batery: 3911 mV
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
Lock info ===========
IMEI       : 357919046821625
IMEI spNet : 3A 75 19 09 64 28 61 02
IMEI svNet : 33 75 19 09 64 28 61 42 F5

Conf key     : 0000000000000000
Provider key : 2440700000000000
Country      : Finland
Operator     : NOKIA (Open)
Counters     : Key 0  [3] , Fbus 0  [10]
Blocks       : 7

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS :  All Open
=============================
CRT308 Backup Created

SDD key status : Damaged!!!!!
CMLA Key status : Not Present
SimLock status : Ok
Security status : Ok
PA_SL3 phone ,  SP_CODE_LEN : 15

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method

Done!

Detected RAP3 full flash file...
Checking, wait ...
SimLock not found... :(

Reboot....
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     1C30020978DA034438E1B360B43FA82619F45AE7
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D172C32473AE199B213465ABB3853246F9631231
ADL: phone is in flash mode

Reading NPC certificate...
IMEI : 357919046821625
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Infinity Best\Backup\Cert\357919046821625_CRT_2nd.rpl

Trying read spr block , wait ...
Get phone data...
Get flash data...
SPR Read Ok!
Spr saved to : 357919046821625.spr

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Processing SimLock extraction....
Checking readed data, wait few seconds
ID_INFO : 79_sr1_12w18.5/27-07-12/RM-596
Initial data found, start fun...
SimLock RPL saved : C:\InfinityBox\BEST\Infinity Best\Backup\Cert\357919046821625_SIM.rpl
SimLock PM  saved : C:\InfinityBox\BEST\Infinity Best\Backup\Cert\357919046821625_SIM.pm
Done!

Elapsed: 00:00:13

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia N8-00
Software ver : V 79_sr1_12w18.5 27-07-12 RM-596 (c) Nokia
IMEI    :      357919046821625
Ape Ver :      111.040.1511
APE Var :      111.040.1511111.040.1511.13.01111.040.1511.C04.01
APE ADSP:      256
DSP Ver :      92_12w18
APE Test:      0.162
PPM     :     
CNT     :     
Product SN   :     MSE952287
Product code :     059D5C3
Base Prd.code:     0596826
Long Prod.SN :     0
Hardware info=======
HWID  : 7470
Retu  : 35
Tahvo : 00
Batery: 3910 mV
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
Lock info ===========
IMEI       : 357919046821625
IMEI spNet : 3A 75 19 09 64 28 61 02
IMEI svNet : 33 75 19 09 64 28 61 42 F5

Conf key     : 0000000000000000
Provider key : 2440700000000000
Country      : Finland
Operator     : NOKIA (Open)
Counters     : Key 0  [3] , Fbus 0  [10]
Blocks       : 7

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS :  All Open
=============================
CRT308 Backup Created

SDD key status : Damaged!!!!!
CMLA Key status : Not Present
SimLock status : Ok
Security status : Ok
PA_SL3 phone ,  SP_CODE_LEN : 15

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method

Done!

Will write LifeTime data...
Set value: 000 h, 00 m
Creating data block...
Result : Error
Done

Using : RM-596.pp
Operating mode is OK, no need change...

Write 45 element(s)...
Writen : 45 elements
Done!

Elapsed: 00:00:00

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Checking StartUp data ...
-----------------------

SDD Key status : SDData Damaged!!!!! :(
 - > Do REPAIR SDD , Local SX4 if needed

CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone ,  SP_CODE_LEN : 15

Done!

Repair SD procedure started...

Phone Imei: 357919046821625
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing Super Dongle Key...   Ok!
Done!

Will Write RPL keys now...
Check RPL file...
CCC Data found! (CMT)
HWC Data found! (CMT)
-> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus

Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
-> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus

Done!

Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
->  Phone not found.. :(
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm, RAPIDO
 -> If RAPIDO - Use DEAD mode for RPL restore ;D

Connect phone on selected interface...


descriptionارجو المساعده  Emptyرد: ارجو المساعده

more_horiz
اخي مانوع البوكس اللي عندك

descriptionارجو المساعده  Emptyرد: ارجو المساعده

more_horiz
هلا بك اخي العزيز
اانا لا امتلك جهاز بوكس


معي جهاز لابتوب واستخدم برنامج infinty best nokia


طيب ايش الذي استنتجت من القراء الي حطيتها
وايش اسوي

descriptionارجو المساعده  Emptyرد: ارجو المساعده

more_horiz
وهل المشكله تحتاج الي جهاز بوكس

descriptionارجو المساعده  Emptyرد: ارجو المساعده

more_horiz
نعم اخي العزيز جهازك محتاج الي بوكس لكي تتم طريقة التفليش بصوره جيده اذا لم تكن تملك بوكس برمجه الرجاء التوجه الي اقرب مكان به برمجة هاتف ولك الشكر

descriptionارجو المساعده  Emptyرد: ارجو المساعده

more_horiz
لايوجد معي بوكس
انا اشتغل ببرنامج best nokia

descriptionارجو المساعده  Emptyرد: ارجو المساعده

more_horiz
لايوجد طريقه بدون استخدام البوكس
يعني عن طريق برنامج مثلا

descriptionارجو المساعده  Emptyرد: ارجو المساعده

more_horiz
يا اخي الفاضل
كيف اعيد imei للجوال
privacy_tip صلاحيات هذا المنتدى:
لاتستطيع الرد على المواضيع في هذا المنتدى