اسرار وخفايا الجوال ويشمل اجهزة النوكيا والموتورولا والسوني اركسون والسامسونج والسيمنز
Motorola CD 160
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode
Free call tip
1. Enter the phone number
2. Enter OK
3. Type *#06#
4. Press Button C
5. And finally press the button for power off.
You should now be able to talk without being billed.
Motorola CD 520
Free call tip
1. Enter the phone number
2. Enter OK
3. Type *#06#
4. Press Button C
5. And finally press the button for power off.
You should now be able to talk without being billed.
Motorola 920/930
The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're لا in the menu) to get the phone number used for with this key when speed dialing.
Keyboard lock
if you push * and # on the same time your keyboard locked. When you press it again, you unlock your keyboard.
Supplementary Menu
If your Motorola CD920 or 930 has the engineering software, you can get an engineering mode by typing : ***113*1*, but you have to maintain each * during 3 sec to get a square. So 3 squares, 113, 1 square, 1, 1 square, CALL. If the software is present you have one supplementary menu. To remove it typ ***113*0* like above
أسرار وخفايا سمنس
هذه هي الموديلات التي يمكنك تطبيق الكودات والأسرار بها وهي :ـ
S1, S3 / S3 Comfort, S4 / S4 Power, C25, S25, M35, S35, C35.
Siemens S1
Secret Codes
SP unlock *#0003*(secret code 8 digits)#
*#06# for checking the IMEI (International Mobile Equipment Identity)
Tetris
Power on phone and enter PIN. before phone has locked onto network, F9, send own number, hit right button, hit 9. left is 2, right is 8, rotate is 5, and drop is 4.
Monitor Mode
1. Menu
2. 9 (Phone Options)
3. 7 (Phone Status)
4. Left Display Button (left MENU key)
5. 5553756
6. HangUp Button (Red HandSet key)
Now "Monitor" should appear at the bottom of the Network Options menu. Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals. Test Mode Indicators: (* = only available when call in progress )
CH Channel Number
RX Signal Strength (dB)
N NCC (Color Code)
B BCC (Color Code)
CI Cell ID (in Hex)
C1+ how long before phone does forced hand over. (see RX and RXAM)
LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC
TXPWR Transmit Power (dB)
RXAM Reeceive signal strength cut-off point
TS* Time Slot Number
TA* Timing Advance. Distance from tower in Km * 2
PL* Power Level
Power Table
PL: 5 6 7 8 9 10 11 12 13 14 15
dB: 33 31 29 27 25 23 21 19 17 15 13
Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02
LF* C1 value with continuous transmisson from tower
LS* C1 Value with discontinuous tranmission from tower
QF* Bit Error Rate with continuous transmission from tower
QS* Bit Error Rate with discontinuous transmission from tower
BER (bit error rate) table
QF/QS register: 0 1 2 3 4 5 6 7
% of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6
Tips and tricks
Nice Sunset in the display. Siemens S3 or younger In the Telephone Book in the section own numbers, first position you have to type in +12022243121 (Number of the Capitol in Washington DC) and save it without a name. Then open this telephone book again do so as you like to change the number but leave the modus without changing anything. A nice Sundown will be shown in the display.
Pin Out
1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO
Siemens S3 / S3 comfort
Secret Codes
SP unlock *#0003*(secret code 8 digits)
#*#06# for checking the IMEI (International Mobile Equipment Identity)
Tetris
Power on phone and enter PIN. before phone has locked onto network, F9, send own number, hit right button, hit 9. left is 2, right is 8, rotate is 5, and drop is 4.
Monitor Mode
1. Menu
2. 9 (Phone Options)
3. 7 (Phone Status)
4. Left Display Button (left MENU key)
5. 5553756
6. HangUp Button (Red HandSet key)
Now "Monitor" should appear at the bottom of the Network Options menu. Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals. Test Mode Indicators: (* = only available when call in progress )
CH Channel Number
RX Signal Strength (dB)
N NCC (Color Code)
B BCC (Color Code)
CI Cell ID (in Hex)
C1+ how long before phone does forced hand over. (see RX and RXAM)
LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC
TXPWR Transmit Power (dB)
RXAM Reeceive signal strength cut-off point
TS* Time Slot Number
TA* Timing Advance. Distance from tower in Km * 2
PL* Power Level
Power Table
PL: 5 6 7 8 9 10 11 12 13 14 15
dB: 33 31 29 27 25 23 21 19 17 15 13
Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02
LF* C1 value with continuous transmisson from tower
LS* C1 Value with discontinuous tranmission from tower
QF* Bit Error Rate with continuous transmission from tower
QS* Bit Error Rate with discontinuous transmission from tower
BER (bit error rate) table
QF/QS register: 0 1 2 3 4 5 6 7
% of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6
Unlock Siemens S3(Not S3 COM)
(For advanced users only)
At addresses 0D8 to 0DD the phones code is stored. To read the code swap nibbles stored at addresses from 0DA to 0DD. Error counter is at 0D9. To clear the Phone Code write at addresses from 0D8 to 0DD: 00, 00, FF, FF, FF, FF.
Siemens S3 comfort
Show IMEI code: * # 06 #
MONITOR MODE
The Siemens S3 Com series have a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.
TO ACTIVATE MONITOR MODE
1. Turn the phone on.
2. Enter the PIN access code on press OK. (Only if is enabled).
3. Press Menu. (Left top button).
4. Press 9. (Phone Options).
5. Press 8. (Phone Status) (May be button 7 in some phones).
6. You may see your IMEI Number
7. Left Display Button (Top left MENU key).
8. 7684666
9. HangUp Button. (Red HandSet key). Note: Monitor should appear now at the bottom of the Network Options menu.
MONITOR MODE TOGGLE
Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes
Tips and tricks
Nice Sunset in the display. Siemens S3 or younger
In the Telephone Book in the section own numbers, first position you have to type in +12022243121 (Number of the Capitol in Washington DC) and save it without a name. Then open this telephone book again do so as you like to change the number but leave the modus without changing anything. A nice Sundown will be shown in the display.
Pin Out
1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO
Siemens S4 / S4 Power
Secret Codes
SP unlock *#0003*(secret code 8 digits)
#*#06# for checking the IMEI (International Mobile Equipment Identity)
MONITOR MODE
The Siemens S4 series also haves a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.
TO ACTIVATE MONITOR MODE
1. Menu
2. 9 (Phone Options)
3. 7 (Phone Status)
4. Left Display Button (left MENU key)
5. 76846666. HangUp Button (Red HandSet key)
Now "Monitor" should appear at the bottom of the Network Options menu. Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals. Test Mode Indicators: (* = only available when call in progress )
Unlock Siemens S4
(For advanced users only)
At addresses 0D8 to 0DD the phones code is stored. To read the code swap nibbles stored at addresses from 0DA to 0DD. Error counter is at 0D9. To clear the Phone Code write at addresses from 0D8 to 0DD: 00, 00, FF, FF, FF, FF.
Pin Out
1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO
Siemens C 25
Secret Codes
*#0606# shows you Secret Code, but only without SIM Card.
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#002# to kill divert
Resets language to automatic selection : * # 0000 # then Green button
**05*PUK1*PIN*PIN# gives you an option for changing your PIN1
If you got the IMEI on your Display you can see the Version of you Mobile by pushing the Button just over the RED button.
Pin Out (electrical connections)
1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO
Siemens S25, M35, S35, C35
Secret Codes
SP unlock *#0003*(secret code 8 digits)
#*#0606# shows you a big Hexadecimal Code, but only without SIM Card.
*#06# for checking the IMEI (International Mobile Equipment Identity)
Resets language to automatic selection : * # 0000 # then Green button
S25
*#00(International prefix code of the country)# you get the language of that country (if supported) e.g.: *#0039# switches to Italian language, *#0044# or *#001# switches to English
S35i
Fullscreen for WAP
Connected to the Internet, press twice right button (the one for recording) and all the status lines, one up of the screen and two on the bottom of the screen, WILL DISAPPEAR !!!! So, you can use the whole screen for browsing the internet !!! Press again the button the lines will appear.
أسرار وخفايا أريكسون
انواع الأجهزه التي يمكنك تطبيق الكودات بها هي :ـ
All the Ericsson phones with exception a part about the T28
* # 0 6 # IMEI number (phone serial no.)
Must be the same number on the sticker inside your phone, if لا your phone may have been cloned All Ericsson Phones.
* # 0 0 0 0 #
Reset language to English (useful when itchy hands changed your phone's language to some other alien form All Ericsson Phones.
> * < < * < *
Service Menu - tells you the phone's software version (good for checking your phone's "age" before buying it); press "Yes" repeatedly to see all the software data & press ">" to see all the texts available in your phone (hundreds of them!); some phones have "Flash?" option to reset the phone (I didn't see any difference after doing that) All Ericsson Phones.
Ericsson T28 Secrets
>*<<*<*
Check the firmware revision information (software release)
>*<<*<*>
1-row text strings. Pressing yes you can check the phones text programming in currently selected language.
>*<<*<*>>
n-row text strings. Pressing yes you can check the phones text programming in currently selected language.
النوكيا
اولا:البطارية:
#3370 * لزيادة في استهلاك البطارية .
#3370# لتقليل نسبة استهلاك البطارية .
مع العلم انك اذا قللت استهلاك البطارية يضعف الارسال......!!
واذا زودت استهلاك البطارية يقوى الارسال يعني انصحك انك ما تغير وضعك الحالي....!!
--------------------
ثانيا:بيانات الجهاز:
#92702689# * تعطيك بينات كاملة عن الجهاز .
#0000#* لرؤية برنامج الجهاز وتاريخ برمجته .
#06#* لرؤية السيريال نمبر حق جهازك انت ووجهك .
-------------------
ثالثا:التحويل:
لتحويل جميع المكالمات :
To Activate: * * 21 * NUMBER # SEND متاح .
To Cancel: # # 21 # SEND الغاء .
To Check: * # 21 # SEND تشييك .
-------------------
لتحويل المكالمات عند الانشغال :
To Activate: * * 67 * NUMBER # SEND متاح
To Cancel: # # 67 # SEND الغاء .
To Check: * # 67 # SEND تشييك (متابعة ) .
To Cancel All Call Forwarding # # 002 # SEND الغاء الجميع.
------------------
تحويل المكالمات عند عدم الرد :
To Activate: * * 61 * NUMBER # SEND متاح .
To Cancel: # # 61 # SEND الغاء .
To Check: * # 61 # SEND تشييك .
------------------
رابعا:الانتظار:
لتشغيل وظيفة الانتظار :
To Activate: * 43 # SEND تشغيل .
To Deactivate: # 43 # SEND الغاء .
To Check: * # 43 # SEND تشييك .
------------------
خامسا:القفل:
قبل كل شي لازم تعرف تكتب هالحروف:
p اظغط على النجمة ( * ) ثلاث مرات .
اظغط على النجمة ( * ) اربع مرات .
اظغط +على النجمة ( * ) مرتين .
#pw+12234567890+1 # تعطي حالة قفل مجهز GIVES PROVIDER-LOCK STATUS .
#pw+12234567890+2 # تعطي حالة قفل شبكة GIVES NETWORK-LOCK STATUS .
#pw+12234567890+3 # تعطي حالة قفل بلد GIVES COUNTRY-LOCK STATUS .
#pw+12234567890+4 # تعطي حالة قفل البطاقة GIVES SIM-CARD-LOCK STATUS .
------------------
سادسا: كود تشغيل اكسسوارات السيارة:
#746025625# * (#SIM0CLOCK#*)
------------------
سابعا: تشغيل الرادار:
1-اختر(القائمة).
2-اختر (الضبط).
3-اختر (ضبط الحماية).
4-اختر (المجموعة المحددة) .
5-اختر (تعمل) .
6-بعدين يبي يسألك عن رقم المجموعة دخل اربعة اصفار بس 0000 .
7-اختر (موافق).
بعدين خلاص تصير شغلت كاشف الرادار.............!!
بس ترا الجوال ما يكشف الرادار الا على بعد كيلو واحد بس...................!!
========================================
نوكيا 3310
معرفة IMEI
لمعرفة رقم IMEI
* # 06 #
سيخرج لك الرقم
لمعرفة الاصدار
هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
* # 3110 #
------------------
لمشاهدة الضمان
هذا الرمز يساعدك على معرفة الضمان الخاص بجهازك
*#92702689# (= *#war0anty#).
سيطلب منك رمز الضمان قم بادخال الرموز التالية :
6232 لمعرفة سنة وشهر الصنع .
7332 لمعرفة اخر مرة تم تصليح الجهاز.
7832 ليظهر لو فعلا سبق وان تم تصفير الجهاز.
9268 لاظهار السيريل نمبر حق الجهاز.
37832 لظبط تاريخ التصنيع ولكن احذر تستطيع عمل ذلك مرة واحدة فقط .
87267 لتأكيد التحويل .
معلومات غلق ساعة البطاقة
للتأكد من امكانية اغلاق ساعة البطاقة
*#746025625# (= *#sim0clock#)
-----------------
اعادة ضبط المصنع
اضغط التالي ولكن هذا الرمز لايشمل الذاكرة واللغة والعدادات
*#7780#
-----------------
حالة الغلق
لتعرف حالة غلق جوالك اضغط
# pw + 1234567890 + [y] #
كما تستطيع معرفة حالة الاقفال بالتالي
# pw + [mastercode] + [y] #
ولاحظ
حرف y يعني الاقفال من 1 الى 4
أي عشرة ارقام خلاف هذه قد تعمل على فك الاقفال 1234567890"
وهذه طريقة لمحاولة فك الاقفال بدون ان تعرف الكود الاصلي للفك
حاول فلن تخسر شيئا
في البداية لازم البين كود يكون مفتوح بعدين C اضغط حرف
سهم لأسفل
C اضغط على السي حتى تخلو الشاشة
اضغط على النجمه حتى تبدأتؤشر ثم اعمل الاتي
04***your pin>#
وفي كل مرة تقفل جوالك تعيد الضبط
=========================
* نوكيا 3210 *
معرفة IMEI
لمعرفة رقم IMEI
* # 06 #
سيخرج لك الرقم
شفرات نص السعر
هذا الرمز يزيد البطارية بنسبة 30% وينقص من صفاء الصوت
هذا رمز التشغيل# * 4720
وهذ رمز لايقافه# # 4720
معلومات غلق الساعة
لتشييك ان كان يمكن غلق الساعة
*#746025625# (= *#sim0clock#)
حالة غلق الاقفال
لتستعلم عن حالة الاقفال
# pw + 1234567890 + [y] #
لو كنت تعرف العشرة ارقام الخاصة بكرتك فتستطيع استخدام التالي
# pw + [mastercode] + [y] #
ولاحظ
حرف y يعني الاقفال من 1 الى 4
ويبدو ان أي عشرة ارقام غير هذه تعمل "1234567890"
=========================
* نوكيا 5510 *
معرفة IMEI
لمعرفة رقم IMEI
* # 06 #
سيخرج لك الرقم
لمعرفة الاصدار
هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
* # 0000 #
قائمة الخدمات
للحصول على معلومات عن جهازك اكتب التالي
*#92702689# (= *#war0anty#).
ستجد قائمة الخدمات
1 IMEI (International Mobile Equipment Identification)
2 تاريخ التصنيع
3 تستطيع هنا ادخال تاريخ الشراء.
لو دخلته غير صحيح ماتقدر تصححه بعدين
4 تاريخ التصليح لو كان سبق تصليحه
5 تحويل معلومات المستخدم
اكواد الطاقة الكاملة
*3370# يزيد في الطاقة ويعمل بعد ماتحط الرمز وتطفي الجوال وتشغله
#3370# لتقفيل الخدمة السابقة ويحتاج ايضا للاقفال والتشغيل.
اكواد نص الطاقة
*4720# يزيد في الطاقة ويعمل بعد ماتحط الرمز وتطفي الجوال وتشغله ( وهو جيد لحالة الانتظار
#4720# لتقفيل الخدمة السابقة ويحتاج ايضا للاقفال والتشغيل
قائمة الانماط
لو ضغطت زر التشغيل شوي بتطلع لك القائمة على طول ولو طولت في الضغط طفى .
فتح الاقفال
وهذه طريقة لمحاولة فك الاقفال بدون ان تعرف الكود الاصلي للفك
حاول فلن تخسر شيئا
في البداية لازم البين كود يكون مفتوح بعدين اضغط حرف C
سهم لأسفل
C اضغط على السي حتى تخلو الشاشة
اضغط على النجمه حتى تبدأتؤشر ثم اعمل الاتي
04***your pin>#
وفي كل مرة تقفل جوالك يبي لك تعيد الضبط
وعلى العموم هو احسن من لاشيء
============================
* نوكيا 6110 و 6150 *
معرفة IMEI
لمعرفة رقم IMEI
* # 06 #
سيخرج لك الرقم
لمعرفة الاصدار
هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
* # 0000 #
ولو مانفع جرب هذا
* # 6110 #
قائمة الخدمات
للحصول على معلومات عن جهازك اكتب التالي
*#92702689# (= *#war0anty#).
ستجد قائمة الخدمات
واذا لم تظهر القائمة جرب الرموز التالية
6232 تاريخ وسنة الصنع .
7332 تاريخ التصليح .
7832 لمعرفة تاريخ شراء الجهاز ان كان مستعمل .
9268 لاظهار الرقم التسلسلي.
37832 لتثبيت تاريخ الشراء ولكن لاحظ انك تسويه مرة وحدة بس
87267 لتاكيد التحويل
اكواد الطاقة الكاملة
*3370# يزيد في الطاقة ويعمل بعد ماتحط الرمز وتطفي الجوال وتشغله
#3370# لتقفيل الخدمة السابقة ويحتاج ايضا للاقفال والتشغيل..
قائمة الانماط
لو ضغطت زر التشغيل شوي بتطلع لك القائمة على طول ولو طولت في الضغط طفى .
=======================
* نوكيا 8210 و 8810 *
معرفة IMEI
لمعرفة رقم IMEI
* # 06 #
سيخرج لك الرقم
لمعرفة الاصدار
هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
* # 8110 #
قائمة الخدمات
للحصول على معلومات عن جهازك اكتب التالي
*#92702689# (= *#war0anty#).
ستجد قائمة الخدمات
واذا لم تظهر القائمة جرب الرموز التالية
6232 تاريخ وسنة الصنع.
7332 تاريخ التصليح .
7832 لمعرفة تاريخ الشراء.
9268 لمعرفة رقم السيريال.
37832 لوضع تاريخ الشراء ولاحظ انه يوضع مرة وحدة بس
87267 لتاكيد التحويل
معلومات غلق الساعة للبطاقة
*#746025625# (= *#sim0clock#)
فتح الاقفال
وهذه طريقة لمحاولة فك الاقفال بدون ان تعرف الكود الاصلي للفك
حاول فلن تخسر شيئا
في البداية لازم البين كود يكون مفتوح بعدين اضغط حرف C
سهم لأسفل
C اضغط على السي حتى تخلو الشاشة
اضغط على النجمه حتى تبدأتؤشر ثم اعمل الاتي
04***your pin>#
وفي كل مرة تقفل جوالك يبي لك تعيد الضبط
وعلى العموم هو احسن من لاشيء
=========================
* نوكيا 8810 *
معرفة IMEI
لمعرفة رقم IMEI
* # 06 #
سيخرج لك الرقم
لمعرفة الاصدار
هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
* # 0000 #
قائمة الخدمات
للحصول على معلومات عن جهازك اكتب التالي
*#92702689# (= *#war0anty#).
ستحصل على التالي
رقم التسلسلي
تاريخ التصنيع
تاريخ الشراء ان كان مدخل
تاريخ التصليح
تحويل معلومات المستخدم
معلومات غلق الساعة للبطاقة
*#746025625# (= *#sim0clock#)
========================
* نوكيا 9000 *
معرفة IMEI
لمعرفة رقم IMEI
* # 06 #
سيخرج لك الرقم
لمعرفة الاصدار
هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
*#682371158412125#
تاريخ التصنيع
*#3283# (or *#DATE#)
اولا:البطارية:
#3370 * لزيادة في استهلاك البطارية .
#3370# لتقليل نسبة استهلاك البطارية .
مع العلم انك اذا قللت استهلاك البطارية يضعف الارسال......!!
واذا زودت استهلاك البطارية يقوى الارسال يعني انصحك انك ما تغير وضعك الحالي....!!
--------------------
ثانيا:بيانات الجهاز:
#92702689# * تعطيك بينات كاملة عن الجهاز .
#0000#* لرؤية برنامج الجهاز وتاريخ برمجته .
#06#* لرؤية السيريال نمبر حق جهازك انت ووجهك .
-------------------
ثالثا:التحويل:
لتحويل جميع المكالمات :
To Activate: * * 21 * NUMBER # SEND متاح .
To Cancel: # # 21 # SEND الغاء .
To Check: * # 21 # SEND تشييك .
-------------------
لتحويل المكالمات عند الانشغال :
To Activate: * * 67 * NUMBER # SEND متاح
To Cancel: # # 67 # SEND الغاء .
To Check: * # 67 # SEND تشييك (متابعة ) .
To Cancel All Call Forwarding # # 002 # SEND الغاء الجميع.
------------------
تحويل المكالمات عند عدم الرد :
To Activate: * * 61 * NUMBER # SEND متاح .
To Cancel: # # 61 # SEND الغاء .
To Check: * # 61 # SEND تشييك .
------------------
رابعا:الانتظار:
لتشغيل وظيفة الانتظار :
To Activate: * 43 # SEND تشغيل .
To Deactivate: # 43 # SEND الغاء .
To Check: * # 43 # SEND تشييك .
------------------
خامسا:القفل:
قبل كل شي لازم تعرف تكتب هالحروف:
p اظغط على النجمة ( * ) ثلاث مرات .
اظغط على النجمة ( * ) اربع مرات .
اظغط +على النجمة ( * ) مرتين .
#pw+12234567890+1 # تعطي حالة قفل مجهز GIVES PROVIDER-LOCK STATUS .
#pw+12234567890+2 # تعطي حالة قفل شبكة GIVES NETWORK-LOCK STATUS .
#pw+12234567890+3 # تعطي حالة قفل بلد GIVES COUNTRY-LOCK STATUS .
#pw+12234567890+4 # تعطي حالة قفل البطاقة GIVES SIM-CARD-LOCK STATUS .
------------------
سادسا: كود تشغيل اكسسوارات السيارة:
#746025625# * (#SIM0CLOCK#*)
------------------
سابعا: تشغيل الرادار:
1-اختر(القائمة).
2-اختر (الضبط).
3-اختر (ضبط الحماية).
4-اختر (المجموعة المحددة) .
5-اختر (تعمل) .
6-بعدين يبي يسألك عن رقم المجموعة دخل اربعة اصفار بس 0000 .
7-اختر (موافق).
بعدين خلاص تصير شغلت كاشف الرادار.............!!
بس ترا الجوال ما يكشف الرادار الا على بعد كيلو واحد بس...................!!
========================================
نوكيا 3310
معرفة IMEI
لمعرفة رقم IMEI
* # 06 #
سيخرج لك الرقم
لمعرفة الاصدار
هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
* # 3110 #
------------------
لمشاهدة الضمان
هذا الرمز يساعدك على معرفة الضمان الخاص بجهازك
*#92702689# (= *#war0anty#).
سيطلب منك رمز الضمان قم بادخال الرموز التالية :
6232 لمعرفة سنة وشهر الصنع .
7332 لمعرفة اخر مرة تم تصليح الجهاز.
7832 ليظهر لو فعلا سبق وان تم تصفير الجهاز.
9268 لاظهار السيريل نمبر حق الجهاز.
37832 لظبط تاريخ التصنيع ولكن احذر تستطيع عمل ذلك مرة واحدة فقط .
87267 لتأكيد التحويل .
معلومات غلق ساعة البطاقة
للتأكد من امكانية اغلاق ساعة البطاقة
*#746025625# (= *#sim0clock#)
-----------------
اعادة ضبط المصنع
اضغط التالي ولكن هذا الرمز لايشمل الذاكرة واللغة والعدادات
*#7780#
-----------------
حالة الغلق
لتعرف حالة غلق جوالك اضغط
# pw + 1234567890 + [y] #
كما تستطيع معرفة حالة الاقفال بالتالي
# pw + [mastercode] + [y] #
ولاحظ
حرف y يعني الاقفال من 1 الى 4
أي عشرة ارقام خلاف هذه قد تعمل على فك الاقفال 1234567890"
وهذه طريقة لمحاولة فك الاقفال بدون ان تعرف الكود الاصلي للفك
حاول فلن تخسر شيئا
في البداية لازم البين كود يكون مفتوح بعدين C اضغط حرف
سهم لأسفل
C اضغط على السي حتى تخلو الشاشة
اضغط على النجمه حتى تبدأتؤشر ثم اعمل الاتي
04***your pin>#
وفي كل مرة تقفل جوالك تعيد الضبط
=========================
* نوكيا 3210 *
معرفة IMEI
لمعرفة رقم IMEI
* # 06 #
سيخرج لك الرقم
شفرات نص السعر
هذا الرمز يزيد البطارية بنسبة 30% وينقص من صفاء الصوت
هذا رمز التشغيل# * 4720
وهذ رمز لايقافه# # 4720
معلومات غلق الساعة
لتشييك ان كان يمكن غلق الساعة
*#746025625# (= *#sim0clock#)
حالة غلق الاقفال
لتستعلم عن حالة الاقفال
# pw + 1234567890 + [y] #
لو كنت تعرف العشرة ارقام الخاصة بكرتك فتستطيع استخدام التالي
# pw + [mastercode] + [y] #
ولاحظ
حرف y يعني الاقفال من 1 الى 4
ويبدو ان أي عشرة ارقام غير هذه تعمل "1234567890"
=========================
* نوكيا 5510 *
معرفة IMEI
لمعرفة رقم IMEI
* # 06 #
سيخرج لك الرقم
لمعرفة الاصدار
هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
* # 0000 #
قائمة الخدمات
للحصول على معلومات عن جهازك اكتب التالي
*#92702689# (= *#war0anty#).
ستجد قائمة الخدمات
1 IMEI (International Mobile Equipment Identification)
2 تاريخ التصنيع
3 تستطيع هنا ادخال تاريخ الشراء.
لو دخلته غير صحيح ماتقدر تصححه بعدين
4 تاريخ التصليح لو كان سبق تصليحه
5 تحويل معلومات المستخدم
اكواد الطاقة الكاملة
*3370# يزيد في الطاقة ويعمل بعد ماتحط الرمز وتطفي الجوال وتشغله
#3370# لتقفيل الخدمة السابقة ويحتاج ايضا للاقفال والتشغيل.
اكواد نص الطاقة
*4720# يزيد في الطاقة ويعمل بعد ماتحط الرمز وتطفي الجوال وتشغله ( وهو جيد لحالة الانتظار
#4720# لتقفيل الخدمة السابقة ويحتاج ايضا للاقفال والتشغيل
قائمة الانماط
لو ضغطت زر التشغيل شوي بتطلع لك القائمة على طول ولو طولت في الضغط طفى .
فتح الاقفال
وهذه طريقة لمحاولة فك الاقفال بدون ان تعرف الكود الاصلي للفك
حاول فلن تخسر شيئا
في البداية لازم البين كود يكون مفتوح بعدين اضغط حرف C
سهم لأسفل
C اضغط على السي حتى تخلو الشاشة
اضغط على النجمه حتى تبدأتؤشر ثم اعمل الاتي
04***your pin>#
وفي كل مرة تقفل جوالك يبي لك تعيد الضبط
وعلى العموم هو احسن من لاشيء
============================
* نوكيا 6110 و 6150 *
معرفة IMEI
لمعرفة رقم IMEI
* # 06 #
سيخرج لك الرقم
لمعرفة الاصدار
هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
* # 0000 #
ولو مانفع جرب هذا
* # 6110 #
قائمة الخدمات
للحصول على معلومات عن جهازك اكتب التالي
*#92702689# (= *#war0anty#).
ستجد قائمة الخدمات
واذا لم تظهر القائمة جرب الرموز التالية
6232 تاريخ وسنة الصنع .
7332 تاريخ التصليح .
7832 لمعرفة تاريخ شراء الجهاز ان كان مستعمل .
9268 لاظهار الرقم التسلسلي.
37832 لتثبيت تاريخ الشراء ولكن لاحظ انك تسويه مرة وحدة بس
87267 لتاكيد التحويل
اكواد الطاقة الكاملة
*3370# يزيد في الطاقة ويعمل بعد ماتحط الرمز وتطفي الجوال وتشغله
#3370# لتقفيل الخدمة السابقة ويحتاج ايضا للاقفال والتشغيل..
قائمة الانماط
لو ضغطت زر التشغيل شوي بتطلع لك القائمة على طول ولو طولت في الضغط طفى .
=======================
* نوكيا 8210 و 8810 *
معرفة IMEI
لمعرفة رقم IMEI
* # 06 #
سيخرج لك الرقم
لمعرفة الاصدار
هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
* # 8110 #
قائمة الخدمات
للحصول على معلومات عن جهازك اكتب التالي
*#92702689# (= *#war0anty#).
ستجد قائمة الخدمات
واذا لم تظهر القائمة جرب الرموز التالية
6232 تاريخ وسنة الصنع.
7332 تاريخ التصليح .
7832 لمعرفة تاريخ الشراء.
9268 لمعرفة رقم السيريال.
37832 لوضع تاريخ الشراء ولاحظ انه يوضع مرة وحدة بس
87267 لتاكيد التحويل
معلومات غلق الساعة للبطاقة
*#746025625# (= *#sim0clock#)
فتح الاقفال
وهذه طريقة لمحاولة فك الاقفال بدون ان تعرف الكود الاصلي للفك
حاول فلن تخسر شيئا
في البداية لازم البين كود يكون مفتوح بعدين اضغط حرف C
سهم لأسفل
C اضغط على السي حتى تخلو الشاشة
اضغط على النجمه حتى تبدأتؤشر ثم اعمل الاتي
04***your pin>#
وفي كل مرة تقفل جوالك يبي لك تعيد الضبط
وعلى العموم هو احسن من لاشيء
=========================
* نوكيا 8810 *
معرفة IMEI
لمعرفة رقم IMEI
* # 06 #
سيخرج لك الرقم
لمعرفة الاصدار
هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
* # 0000 #
قائمة الخدمات
للحصول على معلومات عن جهازك اكتب التالي
*#92702689# (= *#war0anty#).
ستحصل على التالي
رقم التسلسلي
تاريخ التصنيع
تاريخ الشراء ان كان مدخل
تاريخ التصليح
تحويل معلومات المستخدم
معلومات غلق الساعة للبطاقة
*#746025625# (= *#sim0clock#)
========================
* نوكيا 9000 *
معرفة IMEI
لمعرفة رقم IMEI
* # 06 #
سيخرج لك الرقم
لمعرفة الاصدار
هذا الرمز سيخرج لك اصدار جوالك وتاريخ الصنع
*#682371158412125#
تاريخ التصنيع
*#3283# (or *#DATE#)
أسرار وخفايا سامسونج
انواع الأجهزه التي يمكنك تطبيق الكودات بها هي :ـ
SGH-600 and SGH-2100
Samsung SGH-600 / SGH-2100
Secret Codes
*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0837# -> Show Software Version (instructions)
*#0001# -> Show Serial Parameters
*#9125# -> Activates the smiley when charging.
*#9998*228# -> Battery status (capacity, voltage, temperature)
*#9998*246# -> Program status
*#9998*289# -> Change Alarm Buzzer Frequency
*#9998*324# -> Debug screens
*#9998*364# -> Watchdog
*#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.
*#9998*427# -> Trace Watchdog
*#9998*523# -> Change LCD contrast - Only with version G60RL01W
*#9998*544# -> Jig detect
*#9998*636# -> Memory status
*#9998*746# -> SIM File Size
*#9998*778# -> SIM Service Table
*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error.
*#9998*786# -> Run, Last UP, Last DOWN
*#9998*837# -> Software Version
*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.
*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected
*#9998*872# -> Diag
*#9998*947# -> Reset On Fatal Error
*#9998*999# -> Last/Chk
*#9998*9266# -> Yann debug screen (=Debug Screens?)
*#9998*9999# -> Software version
If the up Codes doesn't work, you should change *#9998* to *#0. i.e. *#9998*523# change to *#0523#. Aلاher thing that will help is to remove your simcard.
*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown
SP-unlock SGH-600 and SGH 2100
*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! ) But also changes IMEI to 447967-89-400044-0.
*2767*2878# -> Custom EEEPROM Reset
These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600
أسرار وخفايا موتورلا
اسرار لجوالات موتورلا للموديلات التالية: d460, 6200, 7500, 8200, 8400, 8700, V3688, CD160, CD520, 920 and 930.
Motorola d460
*#06# for checking the IMEI (International Mobile Equipment Identity)
Activate RBS
(Note: pause means the * key held in until box appears) To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.
What's the use of RBS:
Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
Motorola 6200
Activate RBS
(Note: pause means the * key held in until box appears) To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.
These countries has been reported working:
UK (Orange)
AU
What's the use of RBS:
Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
Pin Outs
Numbered left to right, keypad up, battery down
1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector
Motorola 7500
:
IT (model: F16 HW: 5.2 SW: 2.1)
What's the use of RBS:
Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
Pin Outs
Numbered right to left, keypad up, battery down looking
1. Gnd
2. Pos
3. True data (TD) (input)
4. Complimentary data (CD) (input)
5. Return data (RD) (output)
6. Audio gnd
7. Audio out
8. Audio in
Motorola 8200
Activate RBS
(Note: pause means the * key held in until box appears) To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.
These countries has been reported working:
ES, AU, NL, BE
What's the use of RBS:
Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
Pin Outs
Numbered right to left, keypad up, battery down looking
1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector
Motorola 8400
Activate RBS
(Note: pause means the * key held in until box appears)To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.
These countries has been reported working:
IT, NL
What's the use of RBS:
Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
Pin Outs
Numbered left to right, keypad up, battery down
1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector
Motorola 8700
#06# for checking the IMEI (International Mobile Equipment Identity)
Activate RBS
(Note: pause means the * key held in until box appears) To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.
These countries has been reported working:
AU, IT, SG, DE, ES, ZA
What's the use of RBS:
Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
Motorola V3688
*#06# for checking the IMEI (International Mobile Equipment Identity)
Enhanced Full Rate Codec (EFR):
To Enable EFR press [][][] 119 [] 1 [] OK.
To Disable EFR press [][][] 119 [] 0 [] OK
NOTE: Nothing appears on Screen.
Other Phones from Motorola (CD 160, CD 520, 920, 930)
انواع الأجهزه التي يمكنك تطبيق الكودات بها هي :ـ
SGH-600 and SGH-2100
Samsung SGH-600 / SGH-2100
Secret Codes
*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0837# -> Show Software Version (instructions)
*#0001# -> Show Serial Parameters
*#9125# -> Activates the smiley when charging.
*#9998*228# -> Battery status (capacity, voltage, temperature)
*#9998*246# -> Program status
*#9998*289# -> Change Alarm Buzzer Frequency
*#9998*324# -> Debug screens
*#9998*364# -> Watchdog
*#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.
*#9998*427# -> Trace Watchdog
*#9998*523# -> Change LCD contrast - Only with version G60RL01W
*#9998*544# -> Jig detect
*#9998*636# -> Memory status
*#9998*746# -> SIM File Size
*#9998*778# -> SIM Service Table
*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error.
*#9998*786# -> Run, Last UP, Last DOWN
*#9998*837# -> Software Version
*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.
*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected
*#9998*872# -> Diag
*#9998*947# -> Reset On Fatal Error
*#9998*999# -> Last/Chk
*#9998*9266# -> Yann debug screen (=Debug Screens?)
*#9998*9999# -> Software version
If the up Codes doesn't work, you should change *#9998* to *#0. i.e. *#9998*523# change to *#0523#. Aلاher thing that will help is to remove your simcard.
*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown
SP-unlock SGH-600 and SGH 2100
*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! ) But also changes IMEI to 447967-89-400044-0.
*2767*2878# -> Custom EEEPROM Reset
These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600
أسرار وخفايا موتورلا
اسرار لجوالات موتورلا للموديلات التالية: d460, 6200, 7500, 8200, 8400, 8700, V3688, CD160, CD520, 920 and 930.
Motorola d460
*#06# for checking the IMEI (International Mobile Equipment Identity)
Activate RBS
(Note: pause means the * key held in until box appears) To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.
What's the use of RBS:
Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
Motorola 6200
Activate RBS
(Note: pause means the * key held in until box appears) To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.
These countries has been reported working:
UK (Orange)
AU
What's the use of RBS:
Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
Pin Outs
Numbered left to right, keypad up, battery down
1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector
Motorola 7500
:
IT (model: F16 HW: 5.2 SW: 2.1)
What's the use of RBS:
Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
Pin Outs
Numbered right to left, keypad up, battery down looking
1. Gnd
2. Pos
3. True data (TD) (input)
4. Complimentary data (CD) (input)
5. Return data (RD) (output)
6. Audio gnd
7. Audio out
8. Audio in
Motorola 8200
Activate RBS
(Note: pause means the * key held in until box appears) To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.
These countries has been reported working:
ES, AU, NL, BE
What's the use of RBS:
Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
Pin Outs
Numbered right to left, keypad up, battery down looking
1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector
Motorola 8400
Activate RBS
(Note: pause means the * key held in until box appears)To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.
These countries has been reported working:
IT, NL
What's the use of RBS:
Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
Pin Outs
Numbered left to right, keypad up, battery down
1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector
Motorola 8700
#06# for checking the IMEI (International Mobile Equipment Identity)
Activate RBS
(Note: pause means the * key held in until box appears) To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok] This only works with some versions of software.
These countries has been reported working:
AU, IT, SG, DE, ES, ZA
What's the use of RBS:
Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
Motorola V3688
*#06# for checking the IMEI (International Mobile Equipment Identity)
Enhanced Full Rate Codec (EFR):
To Enable EFR press [][][] 119 [] 1 [] OK.
To Disable EFR press [][][] 119 [] 0 [] OK
NOTE: Nothing appears on Screen.
Other Phones from Motorola (CD 160, CD 520, 920, 930)
Motorola CD 160
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode
Free call tip
1. Enter the phone number
2. Enter OK
3. Type *#06#
4. Press Button C
5. And finally press the button for power off.
You should now be able to talk without being billed.
Motorola CD 520
Free call tip
1. Enter the phone number
2. Enter OK
3. Type *#06#
4. Press Button C
5. And finally press the button for power off.
You should now be able to talk without being billed.
Motorola 920/930
The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're لا in the menu) to get the phone number used for with this key when speed dialing.
Keyboard lock
if you push * and # on the same time your keyboard locked. When you press it again, you unlock your keyboard.
Supplementary Menu
If your Motorola CD920 or 930 has the engineering software, you can get an engineering mode by typing : ***113*1*, but you have to maintain each * during 3 sec to get a square. So 3 squares, 113, 1 square, 1, 1 square, CALL. If the software is present you have one supplementary menu. To remove it typ ***113*0* like above
أسرار وخفايا سمنس
هذه هي الموديلات التي يمكنك تطبيق الكودات والأسرار بها وهي :ـ
S1, S3 / S3 Comfort, S4 / S4 Power, C25, S25, M35, S35, C35.
Siemens S1
Secret Codes
SP unlock *#0003*(secret code 8 digits)#
*#06# for checking the IMEI (International Mobile Equipment Identity)
Tetris
Power on phone and enter PIN. before phone has locked onto network, F9, send own number, hit right button, hit 9. left is 2, right is 8, rotate is 5, and drop is 4.
Monitor Mode
1. Menu
2. 9 (Phone Options)
3. 7 (Phone Status)
4. Left Display Button (left MENU key)
5. 5553756
6. HangUp Button (Red HandSet key)
Now "Monitor" should appear at the bottom of the Network Options menu. Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals. Test Mode Indicators: (* = only available when call in progress )
CH Channel Number
RX Signal Strength (dB)
N NCC (Color Code)
B BCC (Color Code)
CI Cell ID (in Hex)
C1+ how long before phone does forced hand over. (see RX and RXAM)
LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC
TXPWR Transmit Power (dB)
RXAM Reeceive signal strength cut-off point
TS* Time Slot Number
TA* Timing Advance. Distance from tower in Km * 2
PL* Power Level
Power Table
PL: 5 6 7 8 9 10 11 12 13 14 15
dB: 33 31 29 27 25 23 21 19 17 15 13
Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02
LF* C1 value with continuous transmisson from tower
LS* C1 Value with discontinuous tranmission from tower
QF* Bit Error Rate with continuous transmission from tower
QS* Bit Error Rate with discontinuous transmission from tower
BER (bit error rate) table
QF/QS register: 0 1 2 3 4 5 6 7
% of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6
Tips and tricks
Nice Sunset in the display. Siemens S3 or younger In the Telephone Book in the section own numbers, first position you have to type in +12022243121 (Number of the Capitol in Washington DC) and save it without a name. Then open this telephone book again do so as you like to change the number but leave the modus without changing anything. A nice Sundown will be shown in the display.
Pin Out
1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO
Siemens S3 / S3 comfort
Secret Codes
SP unlock *#0003*(secret code 8 digits)
#*#06# for checking the IMEI (International Mobile Equipment Identity)
Tetris
Power on phone and enter PIN. before phone has locked onto network, F9, send own number, hit right button, hit 9. left is 2, right is 8, rotate is 5, and drop is 4.
Monitor Mode
1. Menu
2. 9 (Phone Options)
3. 7 (Phone Status)
4. Left Display Button (left MENU key)
5. 5553756
6. HangUp Button (Red HandSet key)
Now "Monitor" should appear at the bottom of the Network Options menu. Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals. Test Mode Indicators: (* = only available when call in progress )
CH Channel Number
RX Signal Strength (dB)
N NCC (Color Code)
B BCC (Color Code)
CI Cell ID (in Hex)
C1+ how long before phone does forced hand over. (see RX and RXAM)
LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC
TXPWR Transmit Power (dB)
RXAM Reeceive signal strength cut-off point
TS* Time Slot Number
TA* Timing Advance. Distance from tower in Km * 2
PL* Power Level
Power Table
PL: 5 6 7 8 9 10 11 12 13 14 15
dB: 33 31 29 27 25 23 21 19 17 15 13
Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02
LF* C1 value with continuous transmisson from tower
LS* C1 Value with discontinuous tranmission from tower
QF* Bit Error Rate with continuous transmission from tower
QS* Bit Error Rate with discontinuous transmission from tower
BER (bit error rate) table
QF/QS register: 0 1 2 3 4 5 6 7
% of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6
Unlock Siemens S3(Not S3 COM)
(For advanced users only)
At addresses 0D8 to 0DD the phones code is stored. To read the code swap nibbles stored at addresses from 0DA to 0DD. Error counter is at 0D9. To clear the Phone Code write at addresses from 0D8 to 0DD: 00, 00, FF, FF, FF, FF.
Siemens S3 comfort
Show IMEI code: * # 06 #
MONITOR MODE
The Siemens S3 Com series have a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.
TO ACTIVATE MONITOR MODE
1. Turn the phone on.
2. Enter the PIN access code on press OK. (Only if is enabled).
3. Press Menu. (Left top button).
4. Press 9. (Phone Options).
5. Press 8. (Phone Status) (May be button 7 in some phones).
6. You may see your IMEI Number
7. Left Display Button (Top left MENU key).
8. 7684666
9. HangUp Button. (Red HandSet key). Note: Monitor should appear now at the bottom of the Network Options menu.
MONITOR MODE TOGGLE
Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes
Tips and tricks
Nice Sunset in the display. Siemens S3 or younger
In the Telephone Book in the section own numbers, first position you have to type in +12022243121 (Number of the Capitol in Washington DC) and save it without a name. Then open this telephone book again do so as you like to change the number but leave the modus without changing anything. A nice Sundown will be shown in the display.
Pin Out
1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO
Siemens S4 / S4 Power
Secret Codes
SP unlock *#0003*(secret code 8 digits)
#*#06# for checking the IMEI (International Mobile Equipment Identity)
MONITOR MODE
The Siemens S4 series also haves a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.
TO ACTIVATE MONITOR MODE
1. Menu
2. 9 (Phone Options)
3. 7 (Phone Status)
4. Left Display Button (left MENU key)
5. 76846666. HangUp Button (Red HandSet key)
Now "Monitor" should appear at the bottom of the Network Options menu. Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals. Test Mode Indicators: (* = only available when call in progress )
Unlock Siemens S4
(For advanced users only)
At addresses 0D8 to 0DD the phones code is stored. To read the code swap nibbles stored at addresses from 0DA to 0DD. Error counter is at 0D9. To clear the Phone Code write at addresses from 0D8 to 0DD: 00, 00, FF, FF, FF, FF.
Pin Out
1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO
Siemens C 25
Secret Codes
*#0606# shows you Secret Code, but only without SIM Card.
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#002# to kill divert
Resets language to automatic selection : * # 0000 # then Green button
**05*PUK1*PIN*PIN# gives you an option for changing your PIN1
If you got the IMEI on your Display you can see the Version of you Mobile by pushing the Button just over the RED button.
Pin Out (electrical connections)
1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO
Siemens S25, M35, S35, C35
Secret Codes
SP unlock *#0003*(secret code 8 digits)
#*#0606# shows you a big Hexadecimal Code, but only without SIM Card.
*#06# for checking the IMEI (International Mobile Equipment Identity)
Resets language to automatic selection : * # 0000 # then Green button
S25
*#00(International prefix code of the country)# you get the language of that country (if supported) e.g.: *#0039# switches to Italian language, *#0044# or *#001# switches to English
S35i
Fullscreen for WAP
Connected to the Internet, press twice right button (the one for recording) and all the status lines, one up of the screen and two on the bottom of the screen, WILL DISAPPEAR !!!! So, you can use the whole screen for browsing the internet !!! Press again the button the lines will appear.
أسرار وخفايا أريكسون
انواع الأجهزه التي يمكنك تطبيق الكودات بها هي :ـ
All the Ericsson phones with exception a part about the T28
* # 0 6 # IMEI number (phone serial no.)
Must be the same number on the sticker inside your phone, if لا your phone may have been cloned All Ericsson Phones.
* # 0 0 0 0 #
Reset language to English (useful when itchy hands changed your phone's language to some other alien form All Ericsson Phones.
> * < < * < *
Service Menu - tells you the phone's software version (good for checking your phone's "age" before buying it); press "Yes" repeatedly to see all the software data & press ">" to see all the texts available in your phone (hundreds of them!); some phones have "Flash?" option to reset the phone (I didn't see any difference after doing that) All Ericsson Phones.
Ericsson T28 Secrets
>*<<*<*
Check the firmware revision information (software release)
>*<<*<*>
1-row text strings. Pressing yes you can check the phones text programming in currently selected language.
>*<<*<*>>
n-row text strings. Pressing yes you can check the phones text programming in currently selected language.