تفضل اخي العزيز اتمنى ان يفيدك الشرح
تجد في الصورة ترتيب الفلاشة
here is ScreensHot
finally phone with ma cyclOne
Here is flash Log Code: Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
[Nokia USB Phonet]: Port opened OK!
Storing Product Code...
Storing PSN...
Storing HWID...
Trying to store Simlock...
Reading Configuration Key...
Hashing...
Reading SHA1-RSA Signature...
Reading SHA1-HMAC Signature...
Storing Simlock...
Trying to store WMDRM RPL...
Reading Keys...
Failed to read WMDRM Key
Reading Security Block...
Security block OK and saved to "RM-714_359330044046082_11082012_023000 PM.SecurityBlock.PM"
WARNING: "7A5C0080FFFB7C40B02DC752DDD8C2E56C5CDEEC.C00079C5" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103042108
CMT_EM_ASIC_ID: 00001051
CMT_EM_ASIC_ID: 00001060
CMT_PUBLIC_ID: 7A5C0080FFFB7C40B02DC752DDD8C2E56C5CDEEC
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 6D956B2D26FEC3C784E216492B7CC90A
CMT_BOOT_ROM_CRC: 2CAC45E2
CMT_SECURE_ROM_CRC: 1CB478AF
CMT Ready!
Prepare phone failed with message -> Not found required CMT Secondary Loader
Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103042108
CMT_EM_ASIC_ID: 00001051
CMT_EM_ASIC_ID: 00001060
CMT_PUBLIC_ID: 7A5C0080FFFB7C40B02DC752DDD8C2E56C5CDEEC
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 6D956B2D26FEC3C784E216492B7CC90A
CMT_BOOT_ROM_CRC: 2CAC45E2
CMT_SECURE_ROM_CRC: 1CB478AF
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.11.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000241, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.11.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A3E0AA6F2F86410BA6D666BACF6186EEFBC82D28
APE Subsystem Not Found
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
CMT PARTNERC Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Backing up simlock...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 03.81
MCU Date 18-06-12
Product RM-714 (Nokia RM-714)
Manufacturer (c) Nokia
IMEI 359330044046082
Mastercode 4747421353
Simlock backup OK, saved to RM-714_359330044046082_11082012_023023 PM.SLBackup.PM
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm714__03.81.mcusw (CMT)...
Booting CMT...
[Nokia USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103042108
CMT_EM_ASIC_ID: 00001051
CMT_EM_ASIC_ID: 00001060
CMT_PUBLIC_ID: 7A5C0080FFFB7C40B02DC752DDD8C2E56C5CDEEC
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 6D956B2D26FEC3C784E216492B7CC90A
CMT_BOOT_ROM_CRC: 2CAC45E2
CMT_SECURE_ROM_CRC: 1CB478AF
CMT Ready!
rm714__03.81.mcusw, Type: Flash Image, Algo: BB5, XSR 1.6
Searching for BootCode: DualLine 32Bit
RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.11.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000241, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.12.11.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A3E0AA6F2F86410BA6D666BACF6186EEFBC82D28
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x000403FF, ONENAND
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, ONENAND
EraseArea[0,CMT]: 0x00140000-0x004BFFFF, ONENAND
EraseArea[0,CMT]: 0x004C0000-0x0073FFFF, ONENAND
EraseArea[0,CMT]: 0x00740000-0x0173FFFF, ONENAND
EraseArea[0,CMT]: 0x00160000-0x0017FFFF, ONENAND
EraseArea[0,CMT]: 0x03E40000-0x0447FFFF, ONENAND
EraseArea[0,CMT]: 0x0F080000-0x0F67FFFF, ONENAND
EraseArea[0,CMT]: 0x01740000-0x02ABFFFF, ONENAND
EraseArea[0,CMT]: 0x02AC0000-0x02F3FFFF, ONENAND
Erase Partition (CMT)
Erase Partition (CMT)
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 0.592s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT KEYS Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT MCUSW1 Certificate...
Writing CMT GENIO_INIT Certificate...
Writing CMT ISA+DYNSW Certificate...
Writing CMT ADA Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT ISA+EXTDRV Certificate...
Programming Status OK!
All blocks written OK! Time taken 6.459s
Flashing Speed: 43279.60 kBit/S
Processing rm714__03.81.mcusw (APE)...
Processing rm714__03.81.ppm_mam (CMT)...
rm714__03.81.ppm_mam, Type: Flash Image, Algo: BB5, XSR 1.6
PAPUBKEYS Hash for CMT: A3E0AA6F2F86410BA6D666BACF6186EEFBC82D28
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x02F40000-0x03E3FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.109s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 1.888s
Flashing Speed: 50445.12 kBit/S
Processing rm714__03.81.ppm_mam (APE)...
Processing rm714__03.81.image_mam_059L509 (CMT)...
rm714__03.81.image_mam_059L509, Type: Flash Image, Algo: BB5, XSR 1.6
PAPUBKEYS Hash for CMT: A3E0AA6F2F86410BA6D666BACF6186EEFBC82D28
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x04480000-0x0F07FFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 2.449s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 9.703sFlashing Speed: 68721.48 kBit/S
Processing rm714__03.81.image_mam_059L509 (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 03.81
MCU Date 18-06-12
Product RM-714 (Nokia RM-714)
Manufacturer (c) Nokia
IMEI 359330044046082
Mastercode 4747421353
IMEI Spare 3A95330044400608
IMEI SV 3395330044400618F1000000
PPM V 03.81, 18-06-12, RM-714, (c) Nokia , MAM
CNT Content: mam_059L509, V 03.81, 18-06-12, RM-714, (c) Nokia
PSN AC2E5A4AH
Product Code 059F7K0
Module Code 0204748
Basic Product Code 059C1M2
PSD 0000000000000000
LPSN 0
WLAN MAC F85F2AF56FC4
RETU 51
TAHVO 00
AHNE 21
HW 1000
RFIC |Alli_4.b.1
DSP MCL_3.60
LCD TPO
BT 19e2-4702E12
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
awesom flashing speed All blocks written OK! Time taken 9.703s